Ss Network

Super Street Network

FORUMS

123 Last
Item Posts    Sort Order

What Is Your Project Car???

 
TachOut
User
Posts: 67
Joined: 09/05
Posted: 09/04/05 08:24 AM

What is your project car and what mods do you have????  

Post Reply
JDMludechik
User
Posts: 118
Joined: 08/06
Posted: 09/04/05 11:39 PM

My project car is My 1997 Prelude SH.   I am going for the nice clean JDM look.
Mods that I have:
Apexi N1 exhaust kit
OEM Style Carbon fiber hood
Neuspeed Race Springs ( soon tein coilovers)
JDM Type S Gauge Cluster
JDM Type S Foglights
JDM Type S Intake Chamber
JDM Type S Valve cover
JDM Type S Front ATTS grille badge
98-01 honeycomb grille
Stock Header is heat wrapped
Short Shifter
Titanium shift knob
Battery is moved to the trunk
NGK sparkplug wires and Spark plugs
16" Wedsport SA-90's w/ Yokohama AVS ES 100's
A good bit more to go, but it is getting there.
Smile  

Post Reply
kainejuice
User
Posts: 54
Joined: 11/99
Posted: 09/05/05 09:25 AM

See for yourself.  

Post Reply
nissan300zxchamp
New User
Posts: 13
Joined: 09/05
Posted: 09/05/05 12:55 PM

I have a 1984 nissan 300zx (non-tubro)....just got it no add-ons yet...keep everyone updated  

Post Reply
Timothy-#001
New User
Posts: 2
Joined: 10/05
Posted: 10/02/05 07:08 PM

I got a 2005 Chevy Cavalier. No mods on it yet but looking for some stuff. keep everyone updated on it.  

Post Reply
Ne0z
Enthusiast
Posts: 299
Joined: 09/05
Posted: 10/03/05 09:47 AM

1987 Supra N/A Auto - Start
Engine/Transmission not installed ATM but have the parts -

UNDER THE HOOD:
7M-GTE Swap
HKS Metal Headgasket
Port & Polished Head (damn good flowing too Smile )
K&N FIPK
GM MAF Conversion
550cc Injectors
Blitz FMIC + Piping Kit
Manual Boost Controller
SupraSport EGR Blockoff Plates
Ceramic Coated 3" Downpipe with Ported Turbo-Elbo
Hall Motorsports Exhaust System 3" DP-Back
R154 5-spd Tranny Swap
ACT Stage 2 Clutch
Lightweight Flywheel
Limited Slip Diff from a 91 Supra Turbo

ROLLERS:
Way pimpin Stock Sawblade rims (soon to be replace after paint job)

STOPPERS:
Brembo Cross Drilled/Slotted Rotors
AXIS Brake pads
Earls Stainless Steel brakeline kit

OUTSIDE: - in progress
Custom Gold Paint with Black Effects
HID pop-up headlights
OEM Style CF Hood (taking FOREVER to get here... ugh!)

INSIDE:
Porsche 944 Black Leather Seats
Triple Gauge Pod
Defi Oil Temp, Boost, Water Temp Gauges
Working on Custom Fiberglassed Dashboard

STIFF STUFF:
CP Racing Tri-Strut Bar
Megan Racing Custom rear Strut Bar
ST Front/Rear Sway Bars
Bilstein Shocks
Eibach Pro-Kit Springs
Du-Luck Floor Bar
Custom Welded Underbody Re-Inforcement

ICE:
Me singing

Hopefully this will be done by Mid-Late Summer 2006 The car is almost entirely Stock right now, im just waiting to get the paintjob done obviously before installing Engine/Tranny  

Post Reply
RokoSoko
User
Posts: 161
Joined: 05/05
Posted: 10/07/05 06:40 PM

1991 Nissan 240sx
S13 front end conversion
Stock CA18 motor
18inch Volk GT-U's
tein hood dampers
tein Drift Spec SD dampers
RS*R Exmag exhaust system
Nismo LSD
4 POT Endless brake kit
and last but not leasstt.....
A set of bride ergo II's
oh and i almost fergot a set of rear R33 taillights i have yet to figuare out how to install.....  

Post Reply
Ne0z
Enthusiast
Posts: 299
Joined: 09/05
Posted: 10/07/05 10:11 PM

^^u have a liftback or coupe? Sounds like a sweet ass car too!  

Post Reply
RokoSoko
User
Posts: 161
Joined: 05/05
Posted: 10/12/05 06:44 PM

Coupe, did you go to autovations?? Or any other events?? If so maybe you can see it sometime bro.
-Ryoku  

Post Reply
Ne0z
Enthusiast
Posts: 299
Joined: 09/05
Posted: 10/13/05 07:02 AM

Yeah, i was at autovations with MNSportCompacts up at the front lefthand side of the place, we won for best car-club. It'll be entered in Autovations next year im hoping once all this money is thrown away...  

Post Reply
slipstream
User
Posts: 56
Joined: 07/05
Posted: 10/13/05 11:41 AM

My project car is a miata but im going to swap the trany and engine for a honda s2000 engine and trany and putting two turbos on and a flowmaster exhaust system and have it sit on a set of enki rims wrapped in toyo treads. Oh and I'm going to take about 300 pounds off of it and hope to have my 0 to 60 time be at least 4.7! Cool  

Post Reply
RokoSoko
User
Posts: 161
Joined: 05/05
Posted: 10/14/05 06:00 AM

Damn i was there too! With my old 240... I dont know some of those MNSC people are striaght up punks! ... But you seem cool enough, uhhh see you there next year? haha My cars gone own it!  

Post Reply
Ne0z
Enthusiast
Posts: 299
Joined: 09/05
Posted: 10/15/05 07:07 AM

MNSC usually only hates on ppl who are
A: Total Newbs constantly asking dumb questions (even then we are generally okay)
B: In the 'Street Racing' Scene, we dont condone it, its a Legitimate car club, not one who breaks laws ect. We are one of the only clubs in the state that are able to reserve Parks and such because we are cool with the Cops and the general Govt' so we dont get harassed  

Post Reply
TachOut
User
Posts: 67
Joined: 09/05
Posted: 10/15/05 11:10 PM

Quote:

My project car is a miata but im going to swap the trany and engine for a honda s2000 engine and trany and putting two turbos on and a flowmaster exhaust system




How the hell are you going to twin turbo a four cylinder? Confused  

Post Reply
Ne0z
Enthusiast
Posts: 299
Joined: 09/05
Posted: 10/16/05 08:07 AM

Better question yet, Why not just make a Silviata? SR20 in it... allready turbo.. NOT a honda... perfect Smile lol  

Post Reply
123 Last

BROWSE CARS BY MARKET

TO TOP