Ad Radar
Ss Network

Super Street Network

FORUMS

Item Posts    Sort Order

need GM 2.2L help

 
racin44
New User
Posts: 1
Joined: 02/13
Posted: 02/10/13 03:34 PM

I recently rebuilt a GM 2.2L ecotec engine from a Saturn. I had to pull it again as it was dumping oil all over. I inspected it close, and replacing  the new rear main seal no matter what. The seal looked real good still. Is there any other areas on the flywheel end that's under pressure?  I resealed both halves of the bottom, mains section, and oil pan section.  Seemed like it was coming out as fast as I can pour it in. Yes, I am experienced at engine rebuilding, and never came across a engine like this. Any tips would be great. I don't want to pull it again.

Confused  

Post Reply
Ray200
New User
Posts: 2
Joined: 02/13
Posted: 02/13/13 04:20 AM

suggest to replace the Main seal, and use a little bit of wheel bearing grease to lube the inne part so that the friction of the crank shaft not "burning" the seal @ first startup. never , ever use a srew driver to replace the seal.  

Post Reply
godfather3G
Guru
Posts: 1910
Joined: 02/08
Posted: 02/20/13 02:35 PM

i suggest you replace the whole car. i had a 97 saturn and it was horrible. unless that is your daily then good luck keeping it on the road.  
-------
the godfather has spoken
R.I.P. GRANDPA PITT AUG 10, 1930 - SEPT 30, 2010

Post Reply
Wolfraver
User
Posts: 79
Joined: 09/10
Posted: 02/21/13 09:19 PM

I traded my 99 sentra for a 2000 saturn sc2, only problems it's an auto and the sunroof doesn't like to close all the way once opened. Other than that, getting 32 mpg.  

Post Reply
vipstatus
New User
Posts: 39
Joined: 04/13
Posted: 04/22/13 12:28 PM

Dumping out oil? That sounds pretty normal for a Saturn.  

Post Reply

BROWSE CARS BY MARKET

TO TOP