KDM Movement

Hello Everyone, I just wanted to introduce myself and my car, to see what you fellow tunning enthusias think. I have been working on this project for about 5 years now and one of my goals is to some day get a feature in SS, I dont think I'm quite ready for it yet but some of my friends think I am. Anyhow heres my 2003 Hyundai Tiburon.

2003 Hyundai Tiburon
Mod List

Engine
• Custom V6 Turbo
• Custom Y pipe
• Custom Up pipe
• Custom Down pipe
• Modified Hotshot headers urbo manifolds
• Blouch Performance TD05-20G
• Synapse 40mm Wastegate
• HKS SSQV Blow Off Valve
• Treadstone TR8 Intercooler
• NGM 310cc Injectors
• NGM Fuel Pressure Regulator
• Walbro 255lph Fuel Pump
• Custom Battery Relocation Kit
• Fidanza Lightweight Flywheel
• Clutch Masters FX400 Four Puck Sprung
• Nology Spark Plug Wires
• NGK Spark Plugs
• Greddy Oil Catch Can
• Greddy Radiator Cap
• NGM Solid Front  Motor Mount
• SSA Catback Exhaust

Exterior

• OEM FL 05-06 Front Bumper Conversion
• OEM KDM 05-06  FL Headlights Conversion
• OEM KDM 05-06 FL Taillight Conversion
• OEM FL 05-06 Fog Lights Conversion
• M&S Front Lip
• GT Tech Type 2 Side Skirts
• GT Tech L pod Rear Skirts
• GT Tech N1 Carbon Fiber Hood
• Aerocatch HoodLatches
• Tomato A&P Eyelids
• Tomato A&P Carbon Fiber C Pillars
• ARK Shorty Antenna
• OEM GT V6 High Rise Spoiler
• OEM KDM Gas Cap
• OEM KDM Tuscani Badges
• Hella 6000k Hids
• Hella 3000k Fog light Bulbs


Interior
• Bride Euro 2 Seats
• Takata 341MPH Harnesses
• Takata Harness Pads
• Sparco Harness Bar
• Sparco Sliders
• Autometer C2 Boost Gauge
• Autometer C2 Oil Pressure Gauge
• Autometer C2 EGT Gauge
• Innovate LC1 AF Gauge
• Apexi-Neo
• TWM M1 Abram Shift Knob
• TWM Short Shifter
• OEM KDM Door Sills
• OEM KDM Pedals
• OEM FL 05-06 Door Handles
• OEM FL 05-06 Center Console
• OEM FL 05-06 Vent Rings
• OEM Fl 05-06 Floor Mats
• NRG 2.5 Quick Release
• NRG Short Hub
• Personal Neo Grinta 350MM


Suspension, Wheels and Brakes
• ARK DT_P Coilovers
• ARK Front Strut Bar
• Work Emotion CR Kai 18X8.5 +25 Front 18x9.5 +38 Rear
• 225/40/18 Toyo T1R Front 245/35/18 Toyo T1R Rear
• KSpec 6mm Spacers Rear
• Rays Engineering Lug Nuts
• Willwood Big Brake Kit Front
• Wilwood Oem Slotted rotors Rear


Audio
• Kenwood DDX6019 DVD
• Custom Magic Boxes
• 10” Alpine Type R Subwoofers
• Infinity Reference 7520a











 

The five years of work definitely shows

I dont see many tiburons on the street anymore
If you dont mind me asking how much money did you put into that  

SOOOO MANY PICTURES!!!! Lol. Joke aside your car is amazing! KDM is here to stay! Actualy theres a really clean sleeper elantra. I think thats the lil hatch. quick lil guy.  
Datsun Man!

Thanks guys! well my car has been through many different faces and about 5 different sets of wheels etc and this is my 2nd custom turbo setup so in all with labor and everything I'm some where over 30k not including the cost of the car, I ussually dont like to think about that figure too much kinda scary lol  

I kinda figured sorry if it was intrusive

But either way it looks like it was worth it  

Harness's with out a rollcage....... EPIC FAILURE  
1991 240sx Hatch, Silvia S15 fiberglass front end, LS1/TH350, Ported 243's, 605/610 238/242 114LSA Cam, LS7 lifters, LQ9 rockers, LS2 Lifter trays, Ported LS6 oil pump, Hardened Pushrods, Patriot Springs, Racetronix 37lb injectors, TCI Flexplate.

Goal 450-500RWP in my less then 2400lb car

Well Unfortionately they dont make a full cage for my car, I suppose I could get one mayde and that is in my future plans but I would have to change my gauge set up among other things to get it to work therefore not on my list of priorities. Also since when must one have a cage in order two have harnesses, its all matter of preferance for show vehicles, unless of course your talking about a competition vehicle which in that case may require a full cage...