i have a auto 92 accord lx and it seems to lack power,i was dropping off my sister at school and pulled out and went to get some breakfast as im in the drive thru smoke starts coming from the right side so i automaticaly knew it was the radiator as soon as i got home safely i filled it with antifreeze and noticed a break in the lower radiator hose so i fixed that but in order to get to the clamp holding it i needed to remoce the distributor and when i did that i screwd up the firing order upon putting  it back on ounce i corrected it it seems to run fine although when i left my house it seems to lack alotta of power did i do sumtin to the codes that arnt on right i kno the code is 1342 but did i install them in the wrong spots is it sumtin else what could it be??? any help is appreciated thank u  

The firing order is 1,3,4,2. It's a honda so the rotating mass spins counter clock wise when you face the  drive belt side of the engine. When you go on the oppisite side to the ditributor it spins clock wise. Set the #1 piston to top dead center and make sure the markings on the main crank pullley reflect that position. Then set the wires in their respective spots, assuming that you messed that up. If that doesn't fix it then maybe it needs to be fine tuned with a timing light and or by some one that knows a little more than you. I teased when I said that but I don't mean any harm by it. Any way, you may only need to use the timing light to fine tune it from what you've described. Next time mark all your postions before taking any thing off. It makes it easier when reinstalling. Good luck.